Electronic Hardware Design
We have an experienced design team with many years of design work in the industry. Some idea of our capability is shown in the aspects below.
Analogue
- Instrumentation precision to <1 μV and <50pA
- DC to 100MHz
- Opto-Electronics
- Sensors PT100, Strain Gauge
- Control
- Audio, Class D
- High Current to 25A, PWM
- Signal Recovery, PSD & Lock-In
Digital
- Logic, FPGA, VHDL, PLD
- Microprocessors 8 to 32bit
- PIC, ARM, AVR etc
- Real time, embedded
- Communications, USB, Ethernet, other
PCB
As part of our electronics design expertise, we are able to offer efficient and intelligently laid out electronically aware PCB designs. Our experience includes -
- Surface Mount, Leaded, Flexy
- Single / Double / Multi-Layered Design
- Analogue / Digital / Mixed
- High Density
Examples of our work
- Water Measurement system
- Comprising of a digital and an analogue PCB, this design used an ARM 9 (32 bit RISC) as its CPU which controlled a sophisticated analogue measurement system, providing measurements of pH, resistivity, colour and turbidity of sample. The unit was battery powered and required a demanding design approach to produce the necessary power consumption. The unit also featured multiple communications options Ethernet, Wifi, USB, RS485 and IR.
- Remote Control RF device
- A low power product that initiated an RF controllled process, this could be started either manually or by detecting an audio tone sequence. This unit used digital filtration and low power techniques to get the 4 month battery life required.
Temperature Sensors
TEC Temperature Control Specialists
A range of temperature sensors for use with our temperature controllers.
| Sensor Type | Part No. | Range | Size | Price |
|---|---|---|---|---|
| PT100, Film | TC-M PT100 DM503 2M | ClassB, -50°C to +500°C | 2 mmx 5 mm x 1.1 mm | £25 |
| PT100, Film | TC-M PT100 DM508 2M | ClassA, -50°C to 550°C | 2 mmx 5 mm x 1.1 mm | £25 |
| PT100 wirewound | TC-M PT100 DA017 2M | ClassA, -200°C to 800°C | 2.8 mm x 25 mm | £30 |
| PT1000, Film | TC-M PT1000 DM507 2M | ClassB, -50°C to 500°C | 2 x10 x 1.2mm | £25 |
| PT100, Patch | TC-M PT100 RTF4 2M | Class B-50°C to 150°C | 40 x 13 mm | £50 |
| PT100, Probe | TC-M PT100 01035 2M | ClassB, -70°C to 200°C | 4 dia x 117 L (mm) | £50 |
| PT100, Air | TC-M PT100 9431 2M | -20°C to 60°C | 8 x 50 mm | £50 |
| NTC, Miniature | TC-M NTC10K B57863 2M | -25°C to 100°C | 2.41 x 6.5 mm | £25 |
| NTC, Screw | TC-M NTC10K 2322 2M | -25°C to 85°C | 3 x 30 mm | £25 |
| NTC, Surface | TC-M NTC10K B57703 2M | -25°C to 100°C | 3 x 30 mm | £25 |
| LM35A | TC-M LM35 CAH 2M | -40°C to 110°C | n/a | £35 |
| LM35 | TC-M LM35 DZ 2M | -40°C to 110°C | 5 x15 mm | £25 |
| Lead only | TC-M GEN 2M | N/A | N/A | £15 |
Electronic Design Services
Electron Dynamics provide a multi-disciplined Electronic Design Services, including consultancy, bespoke design and specialist electronic solutions.
We design products and solutions that balance usability, usefulness, performance, desirability and cost. We have the knowledge to deliver you products to market faster and on budget. Our expertise is wide,drawing from our 17 year trading history, enabling us to offer a range of design services.
As well as complete product designs, we are able to offer sub-assembly and module designs these can allow you to get the expertise very easily and quickly for your product. In addition we can provide consultancy, advice, design analysis and on-site design / development.
- Complete product design
- Sub-assembly
- Module
- Consultancy
- Analysis
- On / Off site
We have significant experience in a many areas, especially temperature control, instrumentation and DSP.
Solutions
- Electronic Hardware Design
- Software Design
- Temperature Control Design
- Instrumentation Product Design
- Scientific Product Design
Standards
 |
Successful CE compliance and approval |
|---|---|
 |
RoHS and WEEE compliance |
 |
IPC-610 Quality Standard for electronic assemblies |